Raspberry Pi Case Guide
Assemble your Raspberry Pi 5 Dual Fan Case with these instructions
Step-by-Step Setup Guide
Apply Blue Pads
Peel the plastic from both sides of each blue pad and stick them on the matching chips on your Raspberry Pi according to size.
Place the Top Plate
After all pads are attached, align the top plate with the rest of the Raspberry Pi and very gently press it onto the blue heatsink pads.
Connect the Fans
Plug the attached fan cable into the fan cable slot by the USB ports.
Secure the Fans
Use the provided screws to fasten each fan to the top plate using the hex key to screw them in.
Attach the Bottom Plate
Place the Raspberry Pi into the bottom plate and align both plates with the mounting holes.
Tighten Everything
Take the screws and fasten everything together from the top side through the bottom to fully secure the Raspberry Pi case. Your setup is complete!
Still Need Help?
Our expert support team is available 24/7 to assist you with any questions or issues